What to do if Windows 7 is locked. Windows is locked: what to do, how to unlock it? Recovery using a Flash Card

Hello my readers! It is unlikely that the average user of the Windows operating system can be surprised by the extortion of money using the malicious Winlock Trojans, better known among the people as the “Windows blocker”.

And it’s not surprising, because every second inexperienced user, having ignored the importance of the security of their computer, automatically sent themselves to the white list of scammers who, as practice shows, quite cleverly “cheat” frightened and confused newcomers who don’t know how to react to such a situation.

Therefore, answering the questions: how to avoid becoming a victim of deception? and what to do if windows is locked? I suggest you carefully study the material presented below, which guarantees getting rid of the problem with a few clicks of the mouse.

Where it all begins

One evening, as usual, browsing various sites on the Internet, reading the news feed, your computer may freeze. And a terrifying banner may appear in the center of the screen, which obscures almost the entire desktop and asks you to send an SMS (which, obviously, is not free) or asks you to top up your account to the mobile number specified in the request. Otherwise, all materials from the computer will be automatically destroyed.

I will give you some practical advice on what to do if Windows is locked and asks for a code. I will give you the best options for unlocking the system.

Without unnecessary movements

Fortunately, for some Trojans you can actually find an unlock code, which, although rare, completely destroys the virus from the system.

You can select the required code using well-known anti-virus databases (more specifically, in a couple of minutes you can find key data on their main pages).

Windows unlocking service is available from the company:

"Doctor Web "
« Kaspersky Lab»

You can open the required page if your system is locked from any other PC, tablet or phone.

Important ! Having unblocked access to the system, do not rejoice prematurely. The next step is to scan the disk using any antivirus program.

System Restore

Before moving on to complex and cunning methods of special software, I suggest trying to eradicate the problem using the means at hand, or rather, calling the task manager in the way you are familiar with (usually Ctrl+alt+Del).

Happened? Then congratulations, you are dealing with an ordinary and simple Trojan that can be removed easily and quickly.

We find a suspicious foreign process in the list of processes.
We forcefully terminate it.

An example of what your virus might look like.

Often, a third-party process has a vague name and is displayed without a description. Identify those in the list and force them to terminate. I advise you to do this slowly and one at a time until the banner disappears.

If a miracle does not happen and the task manager is not called, then I suggest moving on to the stage of using a third-party process manager Explorer.exe, which can be downloaded from the link. The program can be launched using the “Run” command (press Win+R).

The explorer.exe directive makes it very easy to identify a suspicious process.

Military strategy

Another way to deal with a virus is to use some standard programs, including the ordinary notepad or Wordpad.

To do this, you “blindly” (after all, you can’t close or hide the banner yet) you will need:

Launch the Run utility (Win+R)
Write “notepad” in it and click on the “Enter” key.
Ideally, a new text file will be launched under the banner window, in which you will type any text (no matter what) and press the power off button on the system unit.
Next, all processes running in the system will begin to terminate, except for Notepad, which will ask you to “save” or “close without saving” the document (which we, of course, leave unchanged for now).
After deactivating the virus, as in the previous method, find the location of the Trojan and destroy it.

More advanced way

For hacker viruses, “unrealistically complex” Trojans, the method of counteracting the task manager or other system components will not help.

Therefore, it’s time to move on to heavy artillery, or rather to safe mode.

Step-by-step instruction:

We restart the computer, and while the operating system is loading, hold down the F8 key (sometimes the button is different, it depends on your PC).
In the new window (which requires you to select a boot method), select “Safe Mode + Command Prompt”.
After loading, enter regedit in the command line, press enter and launch the registry editor.
We analyze the registry editor of running applications on a PC.
Most likely you will see the full path to the Trojan files located in the Shell key and in the Userinit branch. In “Shell” the virus is listed instead of explorer.exe, and in “userinit” it is listed after the comma.
Copy the full name of the virus to the clipboard.
We enter “del” in the command line, press the spacebar and use the right mouse button to call up the context menu.
In the menu window, select the "Insert" command and press Enter.

Voila, the first Trojan file has been successfully destroyed. We carry out a similar operation with the second and subsequent ones (if any).

Well, that’s all, I have described the main working methods for restoring access to data. If all of the steps described above are difficult for you due to ignorance and fear of making it even worse, I recommend that you take the training course “ computer genius" It will help you gain courage and understand the basics of PC ownership.

I hope that now I can be calm for you and for the safety of your information. Be sure to share this useful information with your friends on social media. networks, they will probably also find this material useful. Don't forget to subscribe to blog updates and install a reliable antivirus! See you again!

Sincerely! Abdullin Ruslan

Today we are going to introduce you to another computer virus - Windows is locked. Windows is blocked, which is also known as Windows Blocked ransomware. This threat is not crypto-ransomware, and it does not encrypt the victim's files. However, she locks their computer and asks the victim to pay if she wants to access the computer again. By blocking the computer, it restricts the user from using programs or files that are stored on the computer. It also displays a full screen message saying that the computer user must pay a ransom to start using the computer again.

The Windows virus is blocked and asks you to buy a card top-up worth 400-600 rubles and enter the code of the criminals in the provided field. Cyber criminals promise to unlock the computer immediately after the victim pays the ransom. The virus says that payment must be made within 10 hours, otherwise the computer system will be damaged. However, don't even start looking for your wallet because it is entirely possible to gain access to your computer without money. All you need to do is to remove the blocked Windows virus from your system.

It is recommended to remove this virus using software because it is very difficult to detect and remove this virus manually. This virus usually names its files differently, so users will not be able to quickly identify and remove it. All we know is where the virus writes its files. It saves them to your Downloads or Temp folder, but in order to enter these folders, you need to restart your computer and enter Safe Mode. You can find detailed instructions on how to remove Windows locked on page 2.

How can a blocked Windows malware enter your PC?

Windows blocked virus can be downloaded from the official website or malware website. Cyber criminals prefer to use click attacks and place harmful links in mildly suspicious content, so if you have even the slightest suspicion that the ad, link or button you are about to click on may lead you to dangerous websites, do not click on them . In order to protect your computer from malware, you should protect it with an anti-spyware tool like .

Malicious files are also distributed via email. The 2-Spyware team strongly recommends that users monitor emails that come from unknown persons, especially if they offer to open attachments. Scammers also tend to send intrusive emails, and if you want to block them, create an email filter instead of clicking the “Unsubscribe” button on the provided message. Criminals typically insert malicious attachments behind this button.

If the Windows Blocked Trojan has already entered your computer, please follow the Windows Blocked removal instructions provided on page 2 and eliminate it from your PC as soon as possible.

How to remove Windows blocked virus?

You should not be afraid of Windows blocked threats, and do not rush to pay it, because this virus can be disabled in a fairly simple way. Since this virus does not encrypt files, but only blocks access to them, it is not dangerous, because by removing this virus, you can regain access to the files. Please use the Windows blocked instructions given below and remove this threat from your computer. To prevent computer threats from infecting your computer, we recommend that you install a powerful security tool. For this reason, we recommend installing the SpyHunter antivirus tool. Do not forget to update your software regularly because only in this way will it be able to identify and eliminate the latest version of the harmful threat.

Greetings, dear readers of my site. I came across a locked computer and wanted to tell you more about it.

When a computer is locked, a banner appears on the screen with text that does not respond to any key at all: Microsoft security has detected violations of Internet usage. Reason: Watching CHILDREN and GAY porn, visiting porn sites.

To unlock Windows 7 you need to:

Top up your BEELINE subscriber number: 89054296778 in the amount of 500 rubles. (The amount can be any 1000, 2000 or 3000 rubles, depending on the greed of the extortionists) You can pay through a terminal for paying for cellular communications. After payment, on the receipt issued by the terminal. You will find your personal unlock code, which you must enter below.

If within 12 hours from the moment this message appears, the code is not entered, all data, including Windows and bios, will be IRREVERSIBLY DELETED! Attempting to reinstall the system will cause problems with your Microsoft Corporation computer. (CALM IN! THIS IS JUST A PICTURE, IT WILL NOT DO ANYTHING TO YOU)

What to do? Universal method!

We quickly fix the problem ourselves, in two steps,
boot into “safe mode with command line support” and execute:

Reboot the computer. Hooray everything is GREAT!!!

The bad option is that your recovery system is disabled or there are no recovery checkpoints. What to do? Don't despair!

Trojan identification

Kaspersky HEUR:Trojan.Win32.Generic 2013.01.29

DrWeb Trojan.Winlock.7907 2013.01.29

Attention!!! Another similar Banner "Windows is blocked" Trojan Winlock 6999 LokoMoTO banner file MVbCn7d.exe or MXROH_U_MF.EXE, YWR4ATG.EXE

Good luck!!! If it helped YOU, share the link with your friends, tell us how you can solve the problems yourself!

HugoBo-SS, The fact of the matter is that reinstalling the System is not exactly the easiest way, but it is 100% Correct, and it is the most extreme in such situations, there is only one huge plus, all the rest are only minuses of this method.. It would be really surprising that in such a bunch of small resources, collected in one compact box like the “Operating System”, each individual component strictly depends on the others, and as soon as only one of them flies, a chain reaction immediately occurs and, as a result, nothing works anymore, instead of that one the only problem. Having spent hundreds of billions of dollars on your product over the years, it is difficult to argue that in such a well-thought-out operating system design, the only way out is always to reinstall all the components with a new one, instead of finding only the one that is not working and fixing it ( the process, in the absence of special tools, is long and labor-intensive, but no less efficient than a complete reinstallation).
Kostya-chist, Thank you very much for the idea about the train, once in a lifetime, but this exact technique will come in handy, let’s take note..

Problem solved in an amazing way that's what I did, maybe it will be useful to someone(I managed to understand that people had a lot of such problems online) :

There were three possible solutions, but only one helped. The first option was to search for certain keys in the registry of a non-working system, after deleting them and rebooting the system, the mouse should have moved - it didn’t work. The second option was “Audit” through the folder properties, a lot fine-tuning for access to each individual folder also did not work out... Option three helped, the general solution to the problem is 50% of success from personal experience, and another 50% of success is the advice of experienced people found in different parts of the Internet.. I remembered that once... then more than once such a trick helped out in Windows XP, decided to check it out and Windows 7- it worked.. I assume that at 8 and 10 it will also work! Closer to the point.. The whole process and various experiments took the entire next day after the problem arose, after more than 12 hours everything was resolved, and the matter turned out to be in the bag, if I had known in advance, then without reinstalling such a problem would be cured in 5-10 minutes. .

Step by step solution to the problem:

1). When you turn on the PC Windows 7 The mouse and keyboard do not work (although in general the devices are in good condition) - Boot from LiveCD(XPE didn’t work for me, it crashed during boot into BSOD, I downloaded Win7PE, everything was fine when booting).. After booting, go to Explorer C :\WINDOWS\system32\config here are the registry files (his! branches).. In Win7 find the child folder inside RegBack, it contains copies of clean registry branches, the integrity of which corresponds to the branches of the newly installed OS, and during the operation of the system they are never changed.. From this folder, copy the registry file (branch) SYSTEM to the parent system folder C :\WINDOWS\system32\config with replacement.. Reboot - the mouse works, the keyboard too..

2). After loading into the Desktop, practically nothing will work because of this: Windows Not succeeds connect To service "Service notifications O systemic events". This hinders entrance V system ordinary users.

This problem can be solved very simply, one person suggested...

» Netsh Winsock Reset «

Next, a window like this appears:

"N.W.R Completed"

»» Click to close spoiler | Press to close the spoiler ""

After these steps, the lock with the annoying message disappears and the PC’s performance returns to normal mode.

3). A few words about the User who was blocked by the system..
I didn’t have time to understand whether this affected the solution to the General problem described here, but this defect when logging into the system turned out to be easy to solve.. Maybe it will be useful.. Boot from LiveCD in the catalog of which there is a removal (removal) tool Passwords users to log in.. Get rid of the selected user's password - That's it! The next time the system boots, the “Blocked” message disappears.

P.S.: No matter how strange the described method for solving the problem turned out to be, it worked, and what’s more, all the utilities remained operational, including Office, Skype, Torrent, all Audio and Video players, there were no problems at all, with the exception of, of course, only one utility.. Kaspersky antivirus.. Reinstalling it took much less time than reinstalling the system would have taken =)

Added by myself: in the system folder of registry branches there are two main files, SOFTWARE and SYSTEM, it is intuitively clear that the first is Installation and configuration of Utilities under the system, the second is Installation and configuration of the OS itself, which is why after replacing the file the problem resolved itself, All settings were reset to default and there were no more blockages or problems with services.

It would do well for any personal computer user to know how to unlock a computer if they have forgotten their access passwords.

No special knowledge required. After following a simple algorithm of actions, in a few minutes you will be able to work on your PC.

How to restore access in Windows 7 and Windows 8?

A password is required to protect private information from unauthorized persons. It does not allow you to log in by simply turning it on. However, if the code is lost or the system has been updated, then access to the data becomes impossible. Each version of Windows OS operates differently.

The Windows 7 operating system is the most popular among the rest. It is very convenient to use. And the process of gaining account access is also quite simple.

But if the user is unable to log in to his account, then he should follow a series of steps listed below:

You need to restart the PC, then hold down the F8 key and bring up the menu.
Use the navigation keys to go to the “Safe Mode” line and press Enter.
Wait until the operating system boots. Then select an account to log in under the name “Administrator” (standard profile, free of a password).
The next step is to close the Safe Mode help window and go to Control Panel through the Start menu or another method.
Open “User Accounts”, log into your personal profile and click on “Change Password”.
Enter a new combination of numbers and numbers in the field, and then save by pressing the desired keys.
After this, you need to restart the computer again and enter the new code in the appropriate field.

"Eight" is only gaining its popularity. To begin with, it is important to make sure that the computer is connected to the network, and during the entire process it is not recommended to unplug the plug from the socket.

To resume work on it if you have lost your password, you need to do the following.

when logging in, you need to click on the power icon, which is located on the right;
hold down the Shift button;
then - “Select action” in the menu that appears;
go to “Diagnostics” by clicking on it;
then click “Return to original state” and click the “Next” button;
wait until the reboot is completed, the presence of the disk is required, without it the action will not be completed;
at the end you need to select “Just delete my files”.

Recovery using a Flash Card

A flash drive will help you quickly access your computer. The main thing is to first write the file to the memory card and do several tasks:

turn off the computer and insert a USB flash drive, turn on the computer;
click on account;
type any combination of numbers and letters and press Enter; when the “Invalid username or password” window appears, you will be asked to restore it;
By clicking on the inscription, you will open the “Password Recovery Wizard”;
then click on the “Next” button, point to the required flash drive;
again click on “Next”, enter a new password and select “Done”.

You can then log in with the new password.

To have such a USB flash drive at hand, you need:

Click on “Start”, go to “Control Panel”.
Select the “User Accounts” tab.
Click on “Create a password reset disk”.
Simultaneously press the Ctrl, Alt, Del keys.
Select the “Change password” section.
Click on the required account and select “Create a password recovery diskette.”
Insert the USB flash drive and click “Next” in the “Wizard”.
In the window that appears, select the USB flash drive device, then click “Next”.
After recording, the userkey.psw file will appear on the USB device. At the end of the operation, click “Next” and “Finish”.
Resume the system.

A flash card is not the only way to fix problems. The file can be copied to your hard drive.

It is important to be especially careful when performing these steps.

By following these instructions it is easy to achieve the desired result.

LediZnaet.ru

How to unlock your computer if you forgot your password

Admin 08/26/2014 - 16:09 Workshop

Sometimes a situation arises when the computer is locked, and the user is unable to guess the password for the account. This state of affairs is rare, but memory is unpredictable, and the operating system cannot directly tell us (except for a user hint, if one was created in advance).

Naturally, to log into the system you will need to reset or change your account password, since it is impossible to remember! To describe this, let’s take an average case where actions are not hampered by other reasons, and the standard installation of Windows favors a successful outcome.

Unlock the computer

An account password or simply an “account” is quite a useful thing, but having forgotten or lost the treasured combination, it is impossible to log in to the system, both for strangers and for you personally. Well, if no changes were made to the accounts, then restoring the login will take a few minutes.

We restart the computer, and after the BIOS picture, press the “F8” key to call up the boot menu.
Use the navigation keys to move to the “Safe Mode” line and press “Enter”.
We are waiting for the operating system to load. To log in, select an “account” under the name “Administrator” (standard profile without a password).
Close the help window about Safe Mode and go to the “Control Panel” through the “Start menu” or in a way convenient for you.
Open the “User Accounts” section. Go to your personal profile and click “change password”.
In the field, enter a new combination of characters and save by pressing the appropriate button (if the input field is left empty, the password will be reset).
After manipulating the password, we reboot. Now all that remains is to enter a new password (if one has been set) and log in to Windows.

Note! If your profile is the only account, then the above actions will be powerless. But there is always another solution, for example, try restoring access via the command line, this method was discussed earlier and will require a Windows boot disk.

P.S.

As you understand, a trivial case will require minimal time investment, but there is also a way out for solving non-standard situations. So don’t go to extremes, and try to avoid changes in the “accounts” section.

wd-x.ru

What to do if you forgot your Windows 7 password?

There are situations when, thinking about protecting their computer, and along with it the information located on the hard drive, a person comes up with a complex and at the same time reliable password for logging into Windows. All this is good, of course, but you can forget a complex password completely by accident.

What to do if you forgot your Windows 7 password?

Especially often, such a negative situation can arise at a time when access to a computer is very necessary and the question immediately arises: what to do if you forgot your Windows 7 password? Although this is not a pleasant situation, there is a solution and we will consider it using Windows 7 as an example.

To solve the problem, you need to be a little hacker, although you don’t have to do anything special, and to reset the password we need a bootable or otherwise Windows 7 installation disk, a bootable USB flash drive will also do.

Using a Windows 7 boot disk

You will need media from which you can install Windows to try to recover your login password. Next, you will need to boot the computer from the boot disk through the boot menu - usually when you start the computer, the keys are used: or, or, or, different manufacturers of computer components use different versions for the bootloader, and in our example this is the key. You can also boot from a disk, of course in a slightly more complicated way, by making settings in the BIOS.

my response Peri- and post-natal development studies in which female rats received subcutaneous injections of cidofovir once daily at doses.

We select the next window, which is exactly what we need to recover a forgotten password in Windows 7, and here the fun begins.

The next window will appear System Recovery Options, where we look at the system drive letter, which will be very useful later.

We press and on the monitor or laptop display, which doesn’t matter at all, the System Recovery Options window will appear, and there will already be quite a few options, but from all the variety you need to choose exactly.

Using the command line to recover a forgotten windows password

The Windows command line will be required to make some adjustments to the operating system. A problem may immediately arise, although by default on most computers Windows is installed on the disk, here your system disk will have a completely different partition letter, here you will have to work a little if you did not remember the partition letter specified earlier in System Recovery Options and find the correct letter disk.

To find the drive letter we need to recover the password, enter the command at the command line:

Bcdedit | find "osdevice"

To which you will immediately receive an answer:

Partition = D

In the example, it was the system drive, but you may have a different letter, usually this. In subsequent steps, you will need to use the resulting partition letter. To begin the next step of recovering a forgotten password, you need to enter the following on the command line:

Copy d:\windows\system32\sethc.exe d:\

Where is the letter of your drive, and after pressing the key you will receive confirmation of copying the file, then you need to enter in the line:

Copy d:\windows\system32\cmd.exe d:\windows\system32\sethc.exe

Click again and you will be prompted to enter YES (yes) or NO (no), enter and a new confirmation for copying the file will appear. For information: a backup copy of the Sticky Keys utility was made, and then it was replaced with the command line.

Toxicities that occurred with greater severity or frequency in previously Order Scopolamine (Transderm Scop) prescription without review One patient died one month post treatment and two patients recovered without further sequelae.

Recovering a forgotten password turns into replacing it

Now we remove the bootable DVD, possibly USB, depending on what was used, and reboot the computer. After the password entry screen appears, you need to press the key 5 times in quick succession - this will bring up the command line. In the prompt field you need to enter Net User, and then the username you used previously and the desired password. You can remind yourself of the username on the windows login screen.

For example, your login name is Cyber, and the desired Engine password, you must enter:

Net User Cyber Engine

After clicking, your account name will remain the same, and the password will change to the recently entered one, and now you can safely log in to Windows 7.

Previously, the operation, which was carried out on the command line, was needed to obtain a backup copy of the sticky key utility sethc.exe and replace it with cmd.exe, and now after logging into Windows and rebooting it, again using the command line you need to return the file back. To do this, boot again from the boot disk and repeat our steps right up to the command line, into which you need to enter:

Copy c:\sethc.exe c:\windows\system32\sethc.exe

You can check the effectiveness of the operation on the screen for entering logs and passwords by pressing 5 times; instead of the command line, we get sticky keys.

In fact, this step is optional and you can skip it.

This command was the last and now you can help not only yourself, but also a friend who accidentally forgot his Windows 7 password and doesn’t know what to do now.

ProComputer.su

What to do if you forgot your user password to log in

People often contact me with the following questions: “what to do if you forgot your Windows password”, “how to unlock your password”, “how to reset your Windows password”, etc. Today I will tell you how to get out of a situation if one of the computer users has forgotten the password to log into the system. And also what to do if the computer administrator forgot the password.

If one of the computer users has forgotten the password, the administrator can reset it and create it again without any problems. But what to do if the administrator himself forgot the password? Let's consider all cases in order.

Situation one: On one of the computers on the network there are at least two accounts: this is a user account and your administrator account.

If the user has forgotten the password, then you log in to the system using your account. Then on the desktop, right-click on the “My Computer” icon and select “Manage”: Next, expand the “Utilities” section and select “Local Users and Groups”. Click here on the Users folder and all existing accounts on the computer will be displayed in the right window. Right-click on your forgetful user name and select “Set Password”:
A warning window will appear - click “Continue”:
You can then set a new password for the user. If you leave the fields here empty and click “OK”, the password will be empty: After this, you can restart the computer and the user will log in with the new password.

___________________________________________________________________________________

Situation two: You don’t remember your administrator password, or you are the only user of the computer (but again, you don’t remember the password).

In this case, we need to log in using the Administrator account built into Windows. Most ordinary users are not even aware of its existence. This account is not password protected by default.

You can log in as Administrator either through the classic login window or in Safe Mode.

The classic window is called up in the following way: after turning on the computer, while on the welcome page, press the key combination Ctrl+Alt+Del twice. In the classic login window, manually enter the name Administrator (in some cases Administrator) - click “OK”.

To enter Safe Mode: After turning on your computer, press and hold the F8 key on your keyboard. Then select “Safe Mode” and press Enter. In the next window, in addition to your account (or entries), the Administrator account will be displayed - log in to the system under it.

Personally, I prefer to log in through the classic login window: it’s more convenient and faster. In addition, on some computers, the keyboard and mouse refuse to work in Safe Mode, so even if you get into this mode, you can’t do anything there.

Regardless of how you logged into your Administrator account, then we do the same thing as I already described above. Namely: find the “My Computer” icon on the desktop and right-click on it and select “Manage”.

Next, expand the “Utilities” section and select “Local Users and Groups”. Click here on the Users folder and all existing accounts on the computer will be displayed in the right window.

Right-click on your account name and select “Set Password.” A warning window will appear - click “Continue”. You can then set a new password for the user. If you leave the fields here empty and click “OK”, the password will be empty. After this, you can restart your computer and log in with a new password.

____________________________________________________________________________________

Situation three: But what to do if the built-in Administrator account is under a password and it is unknown to us? Should I reinstall windows? Of course not! We can solve this problem if we use the ERD Commander emergency recovery boot disk.

You can download the archive with the image of this disk intended for restoring Windows XP here. After this, burn the image to a CD or DVD (for example, via Alcohol 120%). Then insert the recorded disc into the computer drive and configure the BIOS to boot from it.

During boot, you will see the following on the screen: Then, when launched, ERD Commander will try to detect and configure network cards - skip this operation by clicking the “Skip Network Configuration” button: Next you need to connect to your operating system. To do this, select the windows system folder and click “OK”:
We wait for the download to finish (from a CD, naturally, it is slower than from a hard drive). After a while we will see a desktop on the screen that is almost no different from the usual Windows XP desktop:
Go to “Start” – select the section “System Tools” – “Locksmith”: The Locksmith utility (Password Change Wizard) allows you to change passwords for administrator and user accounts.

In the welcome window that appears, click “Next”.

In the next window, in the “Account” field, select the account for which you forgot the password. In the “New Password” and “Confirm Password” fields, enter the new password.
Click the “Next” button. In the last window, click the “Finish” button and restart your computer. Don't forget to set the BIOS to boot from the hard drive. That's all! Now you can log in to your account with a new password.

ATTENTION: If none of the proposed methods helped you, then read my new article “How to easily reset a forgotten password in any version of Windows.” There I described in detail how you can remove a user password in Windows 10, 8.1, 8, 7 and XP.

blogsisadmina.ru

What can you do if you forgot your password on your computer?

Anyone can forget the password for Windows 7 or Windows 8. Fortunately, its restoration does not require any specific skills or abilities. With due care, within a few minutes you will be able to unlock your computer.

All modern operating systems have password protection, and it doesn’t matter what kind of computer you have. This is necessary to prevent unauthorized people from using your personal device. The password does not allow you to open the system by simply turning on the PC. But perhaps you have forgotten this password and do not know what to do. This may happen unconsciously, or perhaps you recently installed a new OS and have not yet had time to automatically remember the password. How can I remove the lock that prevents me from logging in?

If you have a computer running Windows 7 or Windows 8, then the password recovery process will not take you much time. Sometimes, to unlock your computer, you may need the installation disk from which you installed the operating system. It is often impossible to recover a password without such a disk. So, what to do if you forgot your computer password?

Password recovery on Windows 8

To log into a computer running Windows 8, you do not need to reinstall the operating system. Follow these steps:

Make sure that the PC is connected to the network; it cannot be disconnected while you are resetting the password;
When you log into Windows 8, click on the power icon (located in the lower right corner);
Press the "Shift" key and do not release;
From the menu that opens, select “Reboot”, the “Select action” window will open.
You need to enter “Diagnostics” by clicking on it with the mouse;
Click on the line “Return to original state”;
Click Next;
Wait until the Windows 8 system recovers. If the device does not have an installation disk, the system will ask you to insert it, otherwise the recovery will not complete;
Then "Just delete my files" will appear. You need to select this item.

If everything is done correctly, the Windows 8 computer will return to its original state and you can create a new user. However, it is worth considering that all data from your PC will be deleted without the possibility of recovery. Therefore, you first need to back up your files to an external storage device.

Password recovery on windows 7

A user, if he has forgotten the password on his computer, can log into the computer on Windows 7 in two ways: unlock the system using the Windows 7 installation disk and save the password on a flash drive (or any other external storage device).

Using the Windows 7 installation disc

Follow these steps:

You need to turn on the computer;
Then insert the disc;
When it loads, click on “System Restore”, a new window will open;
Select the OS for which you forgot the password (if more than one OS is installed);
Click “Next”, the following window will open;
Select “Command Line”;
Type “regedit” and click Enter to go to the registry;
In the editor, highlight “HKEY_LOCAL_MACHINE”;
Open the "File" menu;
Click “Load hive...”, a new window will appear;
Go to C: windowssystem32config and left-click “system” twice;
Come up with a name for the new branch;
Go to HKEY_LOCAL_MACHINE, open this thread;
Highlight "setup";
Right-click on “SetupType”, then “Change...”, the following window will appear;
In the “Value” line, press 2, then “OK”;
In the registry, right-click on “CmdLine”, then “Change...”;
In the “Value” line, enter “cmd.exe”, then “OK”;
Exit Registry Editor, launch it again;
Go to HKEY_LOCAL_MACHINE;
Select the created branch, then “File” – “Unload bush...”;
After closing all windows, reboot the system. When rebooting, remove the installation disk;
When the computer turns on, the command prompt will appear. Write in it “net user name of the created branch password” (for example, “net user Vasily Administrator 2222”);
Then click Enter;
Close the window when Windows 7 starts, enter the password. You should now be able to log in.

Flash drive for password

If users of Windows 7 OS have forgotten their password, it is possible to log into the system and unlock the password using a special function for creating a flash drive. To create such a flash drive.